Ask what the description actually identifies
When someone describes an item as wooden, ask which parts they mean and what written material information is available. A surface, core, edge and backing may be described separately. Colour or a visible pattern is not enough to prove a species or internal construction. Keep the supplier’s exact description in your notes and distinguish it from your own observation. The objective is a useful comparison, not amateur authentication. If material identity affects a technical, legal or conservation decision, seek an appropriately qualified assessment rather than relying on a photograph.
Make a component-based table
Draw columns for the component, stated material, evidence and questions. For a proposed cabinet, the top, sides, back and handles can each have their own row. Add the finish as a separate entry because a surface treatment is not the same thing as the material underneath. Do not assume that two proposals use identical construction because their exterior colours match. Ask each maker to clarify ambiguous descriptions in writing. This makes later discussions about care, changes and delivery more concrete without requiring you to prescribe manufacturing methods yourself.
Use samples as references, not guarantees
If samples are supplied, label them with permission and record the date, product description and proposal they belong to. Look at them in the intended room to discuss appearance, keeping them away from damaging conditions and following any handling instructions. A small sample cannot demonstrate the safe capacity or long-term performance of a finished item. Do not soak, burn, scratch or chemically test it to identify the material. Record appearance differences honestly and ask the maker which variation should be expected in the complete proposed piece.
Work through a Bulawayo comparison
Imagine a Bulawayo household comparing two written proposals for the same storage brief. Proposal A explains each major component; proposal B uses only the phrase “quality wood.” The household can ask for clarification before comparing the offers. It should not declare either proposal superior from that wording alone, and no price is assumed in this example. The exercise exposes missing information. Add a row for what happens if a stated material changes before production, so substitutions are discussed rather than silently treated as equivalent to the original description.
Connect identity to future care
CCI references explain that wood, finishes and unfinished surfaces have different vulnerabilities; museum treatment procedures should not be copied into household cleaning experiments. Ask for care instructions appropriate to the actual supplied materials and finish. Keep those instructions with the final specification and receipt. At handover, check that the component descriptions still match what was agreed and record questions before accepting assumptions. A good material sheet gives you a traceable description and a route to clarification. It does not certify a species, establish lawful sourcing or replace the maker’s responsibility for a suitable technical proposal.
Sources & further reading
Use these references to check the underlying guidance and any current local requirements. Practical worksheets and illustrative examples in this guide are original educational material.
- Canadian Conservation Institute: Furniture, wooden objects and basketry
- Canadian Conservation Institute: Basic care — Furniture and objects made of wood
- Canadian Conservation Institute: Care and Cleaning of Unfinished Wood
This guide is general information. Source notes are not a claim of independent professional review.